Untitled Document

MSS SX
( Click here to get Information)
Sizes From: MSS-SX 454 (400x500x400) to MSS-SX 10158 (1000x15000x800) The MSS-SX series are a small to medium range of Bridge style CMMs that are designed to accommodate the measurement of small to medium size parts manufactured in all areas of the manufacturing industry. The MSS-SX series of CMM’s are an entry level CMM without any compromise to quality. The bridge style CMM is known throughout the industry as one of the most stable designs for good metrology. ALL MSS-SX series CMM can be equipped with either Renishaws UCC2 or UCC-Lite CMM controller driving system. Utilizing Renishaws line of controllers allow All MSS-SX series CMM’s to be equipped with any Renishaw probing system which can be configured to meet the customers exact requirements to maximize throughput. MSS-SX series utilize precision ground air bearing for all moving axis, thus allowing for smooth friction free motion. Key features Precision ground granite guides and surfaces Manual and DCC control 0.1μm resolution scales Air bearings on all axis Pneumatic Z axis counterbalance Protective covers X & Y axis All axis belt driven for smooth and quite motion Key benefits Renishaws UCC2 or UCC-Lite controllers All Renishaw probe and probing equipment Loads of 3000 lb. Speeds of 600 mmps Open architecture controller (errormap is open) Customer has the ability to calibrate and square at no extra cost. The ability to check volumetric & modify. (10 min process)
Model: MSS SX Series

Sizes From:

MSS-SX 454 (400x500x400) to MSS-SX 10158 (1000x15000x800)

The MSS-SX series are a small to medium range of Bridge style CMMs that are designed to accommodate the measurement of small to medium size parts manufactured in all areas of the manufacturing industry. The MSS-SX series of CMM’s are an entry level CMM without any compromise to quality. The bridge style CMM is known throughout the industry as one of the most stable designs for good metrology. ALL MSS-SX series CMM can be equipped with either Renishaws UCC2 or UCC-Lite CMM controller driving system. Utilizing Renishaws line of controllers allow All MSS-SX series CMM’s to be equipped with any Renishaw probing system which can be configured to meet the customers exact requirements to maximize throughput.

MSS-SX series utilize precision ground air bearing for all moving axis, thus allowing for smooth friction free motion.

Key features

Precision ground granite guides and surfaces
Manual and DCC control
0.1μm resolution scales
Air bearings on all axis
Pneumatic Z axis counterbalance
Protective covers X & Y axis
All axis belt driven for smooth and quite motion

Key benefits

Renishaws UCC2 or UCC-Lite controllers
All Renishaw probe and probing equipment
Loads of 3000 lb.
Speeds of 600 mmps
Open architecture controller (errormap is open)
Customer has the ability to calibrate and square at no extra cost.
The ability to check volumetric & modify. (10 min process)

Model: MSS SX Series

MSS SY
( Click here to get Information)
Sizes From: MSS-SY 553 (500x500x300) to MSS-SY 12158 (1200x15000x800) MSS-SY series is the latest generation of Moving Bridge style high accuracy high speed Coordinate Measuring Machine from MSS. The MSS-SY serials combines single-point probing and analog scanning in a single high performance measuring machine also can equipped with contact and non-contact probe system. ALL MSS-SX series CMM can be equipped with either Renishaws UCC2 or UCC-Lite CMM controller driving system. Utilizing Renishaws line of controllers allow All MSS-SX series CMM’s to be equipped with any Renishaw probing system which can be configured to meet the customers exact requirements to maximize throughput. Granite fixed worktable, all three axes are precision ground granite, allow for stable coefficient of thermal expansion. - Granite worktable with integral “dovetail” guide in X axis, eliminates the pitch and yaw ,also provides superior motion stability. - Z axis air-balance with self-protection ,improve motion capability. - Advanced synchronous belt drive system with non-slip and high stiffness, ensures high stability, lower noise. - Precision ground air bearing on all axes. - High-powered DC servo motors - RENISHAW scale NC 654Performance Specifications Measuring Strokes : 600(mm) x 500(mm) x 400(mm) Overall Dimension : 1630(mm) x 1280(mm) x 2380 (mm) Max part weight : 500 kg Resolution : 0.1 (mm) Accuracy according GB/T16857.2-1997 equal ISO 10 360： (Volumetric length measuring error) E =2.5 +3.5L/1000 [mm](Volumetric Probing Error) R = 2.4 mm Average room temperature: 18 - 22 °C Maximum thermal gradients: 2 °C Air supply system (Min. air pressure) : 0.7 MPa Electrical requirements - 电压 (Voltage) : 110 Vac ± 10% (Frequency) : 50 Hz (Current) : 10 A Allowed Maximum Floor Vibration (Frequency Range): 0 ~ 19 Hz 19~75 Hz > 75 Hz Key features Precision ground granite guides and surfaces Manual and DCC control 0.1μm resolution scales Air bearings on all axis Pneumatic Z axis counterbalance Protective covers X & Y axis All axis belt driven for smooth and quite motion Key benefits Renishaws UCC2 or UCC-Lite controllers All Renishaw probe and probing equipment Speeds of 500 mmps Open architecture controller (errormap is open) Customer has the ability to calibrate and square at no extra cost. The ability to check volumetric & modify. (10 min process)
Model: MSS SY Series

MSS SY
( Click here to get Information)

Sizes From:

MSS-SY 553 (500x500x300) to MSS-SY 12158 (1200x15000x800)

MSS-SY series is the latest generation of Moving Bridge style high accuracy high speed Coordinate Measuring Machine from MSS. The MSS-SY serials combines single-point probing and analog scanning in a single high performance measuring machine also can equipped with contact and non-contact probe system. ALL MSS-SX series CMM can be equipped with either Renishaws UCC2 or UCC-Lite CMM controller driving system. Utilizing Renishaws line of controllers allow All MSS-SX series CMM’s to be equipped with any Renishaw probing system which can be configured to meet the customers exact requirements to maximize throughput.
Granite fixed worktable, all three axes are precision ground granite, allow for stable coefficient of thermal expansion.

- Granite worktable with integral “dovetail” guide in X axis, eliminates the pitch and yaw ,also provides superior motion stability.
- Z axis air-balance with self-protection ,improve motion capability.
- Advanced synchronous belt drive system with non-slip and high stiffness, ensures high stability, lower noise.
- Precision ground air bearing on all axes.
- High-powered DC servo motors
- RENISHAW scale

NC 654Performance Specifications
Measuring Strokes : 600(mm) x 500(mm) x 400(mm)
Overall Dimension : 1630(mm) x 1280(mm) x 2380 (mm)
Max part weight : 500 kg
Resolution : 0.1 (mm)
Accuracy according GB/T16857.2-1997 equal ISO 10 360：
(Volumetric length measuring error) E =2.5 +3.5L/1000 [mm](Volumetric Probing Error) R = 2.4 mm
Average room temperature: 18 - 22 °C
Maximum thermal gradients: 2 °C
Air supply system
(Min. air pressure) : 0.7 MPa
Electrical requirements
- 电压 (Voltage) : 110 Vac ± 10%
(Frequency) : 50 Hz
(Current) : 10 A
Allowed Maximum Floor Vibration (Frequency Range): 0 ~ 19 Hz 19~75 Hz > 75 Hz

Key features

Precision ground granite guides and surfaces
Manual and DCC control
0.1μm resolution scales
Air bearings on all axis
Pneumatic Z axis counterbalance
Protective covers X & Y axis
All axis belt driven for smooth and quite motion

Key benefits

Renishaws UCC2 or UCC-Lite controllers
All Renishaw probe and probing equipment
Speeds of 500 mmps
Open architecture controller (errormap is open)
Customer has the ability to calibrate and square at no extra cost.
The ability to check volumetric & modify. (10 min process)

Model: MSS SY Series

MSS EY
( Click here to get Information)
Sizes From: MSS-EY 9127 (900x1200x700) to MSS-EY 153015 (1500x3000x1500) MSS EY series is the latest generation of Moving Bridge style high accuracy high speed Coordinate Measuring Machine from MSS MSS EY serials combines single-point probing and analog scanning in a single high performance measuring machine also can equipped with contact and non-contact probe system. Based on the new generation of controller combines and optimises temperature and accuracy compensation systems and advanced algorithms to support high-speed, high-accuracy analog open and closed loop scanning. The high accuracy solution for large work piece inspection MSS EY series CMM are suited for accurate measuring in the production field for large parts, part layout, reverse engineering, and quality control. MSS EY series CMM use high trestle L shape structure that will assure the stability of a large structure to move smoothly and accurately. This design will allow for rapid measuring speeds, with little pitch and yaw to assure the collection of highly accurate data. MSS EY series CMM’s worktable, guideways and upright post are all made from precision ground granite. By using granite in all axis’s allows for a very stable machine from thermal expansion. ALL MSS-EY series CMM can be equipped with either Renishaws UCC2 or UCC-Lite CMM controller driving system. Utilizing Renishaws line of controllers allow All MSS-EY series CMM’s to be equipped with any Renishaw probing system which can be configured to meet the customers exact requirements Key features Precision ground granite guides and surfaces Manual and DCC control 0.1μm resolution scales Air bearings on all axis Pneumatic Z axis counterbalance All axis belt driven for smooth and quite motion Key benefits Renishaws UCC2 or UCC-Lite controllers All Renishaw probe and probing equipment Speeds of 600 mmps Open architecture controller (errormap is open) Customer has the ability to calibrate and square at no extra cost. The ability to check volumetric & modify. (10 min process) Specifications Click on picture for PDF
Model: MSS EY Series

MSS EY
( Click here to get Information)

Sizes From:

MSS-EY 9127 (900x1200x700) to MSS-EY 153015 (1500x3000x1500)

MSS EY series is the latest generation of Moving Bridge style high accuracy high speed Coordinate Measuring Machine from MSS
MSS EY serials combines single-point probing and analog scanning in a single high performance measuring machine also can equipped with contact and non-contact probe system. Based on the new generation of controller combines and optimises temperature and accuracy compensation systems and advanced algorithms to support high-speed, high-accuracy analog open and closed loop scanning.

The high accuracy solution for large work piece inspection
MSS EY series CMM are suited for accurate measuring in the production field for large parts, part layout, reverse engineering, and quality control.
MSS EY series CMM use high trestle L shape structure that will assure the stability of a large structure to move smoothly and accurately. This design will allow for rapid measuring speeds, with little pitch and yaw to assure the collection of highly accurate data.
MSS EY series CMM’s worktable, guideways and upright post are all made from precision ground granite. By using granite in all axis’s allows for a very stable machine from thermal expansion.

ALL MSS-EY series CMM can be equipped with either Renishaws UCC2 or UCC-Lite CMM controller driving system. Utilizing Renishaws line of controllers allow All MSS-EY series CMM’s to be equipped with any Renishaw probing system which can be configured to meet the customers exact requirements

Key features

Precision ground granite guides and surfaces
Manual and DCC control
0.1μm resolution scales
Air bearings on all axis
Pneumatic Z axis counterbalance
All axis belt driven for smooth and quite motion

Key benefits

Renishaws UCC2 or UCC-Lite controllers
All Renishaw probe and probing equipment
Speeds of 600 mmps
Open architecture controller (errormap is open)
Customer has the ability to calibrate and square at no extra cost.
The ability to check volumetric & modify. (10 min process)

Specifications

Click on picture for PDF

Model: MSS EY Series

MSS G
( Click here to get Information)
Sizes From: MSS-G 203015 (2000x3000x1500) to MSS-G 255020 (2500x5000x2000) MSS G series gantry type CMM is suited for large scale accurate inspection of very large parts, such as automobile, aviation, large molds etc.. ALL MSS-SX series CMM can be equipped with either Renishaws UCC2 or UCC-Lite CMM controller driving system. Utilizing Renishaws line of controllers allow All MSS-SX series CMM’s to be equipped with any Renishaw probing system which can be configured to meet the customers exact requirements. Key features Precision ground granite guides and surfaces Manual and DCC control 0.1μm resolution scales Air bearings on all axis Pneumatic Z axis counterbalance All axis belt driven for smooth and quite motion Key benefits Renishaws UCC2 or UCC-Lite controllers All Renishaw probe and probing equipment Speeds of 600 mmps Open architecture controller (errormap is open) Customer has the ability to calibrate and square at no extra cost. The ability to check volumetric & modify. (10 min process)
Model: MSS G Series

MSS G
( Click here to get Information)

Sizes From:

MSS-G 203015 (2000x3000x1500) to MSS-G 255020 (2500x5000x2000)

MSS G series gantry type CMM is suited for large scale accurate inspection of very large parts, such as automobile, aviation, large molds etc..
ALL MSS-SX series CMM can be equipped with either Renishaws UCC2 or UCC-Lite CMM controller driving system. Utilizing Renishaws line of controllers allow All MSS-SX series CMM’s to be equipped with any Renishaw probing system which can be configured to meet the customers exact requirements.

Key features

Precision ground granite guides and surfaces
Manual and DCC control
0.1μm resolution scales
Air bearings on all axis
Pneumatic Z axis counterbalance
All axis belt driven for smooth and quite motion

Key benefits

Renishaws UCC2 or UCC-Lite controllers
All Renishaw probe and probing equipment
Speeds of 600 mmps
Open architecture controller (errormap is open)
Customer has the ability to calibrate and square at no extra cost.
The ability to check volumetric & modify. (10 min process)

Model: MSS G Series